XPC slim DS10U3
Fanless Slim PC with a Whiskey-Lake-U processor in industrial design
The DS10U-series is a fanless slim PC with a robust 1.3-litre metal chassis and exceptional connectivity. It supports two digital video outputs for UHD/4K displays and one traditional D-Sub/VGA connector. The built-in Intel "Whiskey-Lake-U" processor provides ample performance for playback of 2160p/60 videos. Installation of components goes straight forward, as there is plenty of interior space for two memory modules, one 2.5" drive and an M.2-2280 SSD card. Optionally, an LTE module can be fitted in the 2,5" bay using the WWN03 accessory. Thanks to its passive cooling, the system is virtually maintenance-free and is approved for 24/7 nonstop operation. It is big on performance, yet extremely energy-efficient. The Shuttle XPC slim Barebone DS10U series is an ideal platform for professional applications such as digital signage, POS, Kiosk, Thin Client, Office PC and Multimedia.
Specifications:
Fanless and Silent
- Passive cooling, no fan noise at all
- Perfect to be used in noise-sensitive environments
- Fanless, dust-free and thus virtually maintenance-free
Low Power Consumption
- Power consumption in idle mode with 2.5" SSD under Windows 10: ca. 6 W only
24/7 Nonstop Operation
- This device is approved for 24/7 permanent operation.
- Requirements:
- Free circulation of air amongst the PC must be guaranteed.
- Ventilation holes must stay clear.
- If a hard disk is installed, this must also be approved for permanent operation by its manufacturer
Chassis
- Slim-PC with black steel chassis
- Without cooling fan, passive cooling only
- The bays for memory, 2.5" drive and M.2 card
- can easily be accessed by removing two cover plates.
- Dimensions: 200 x 165 x 39.5 mm (LWH) = 1.3 litres
- Weight: 1.5 kg net and 2.2 kg gross
- Two holes for Kensington Lock and numerous
- threaded holes (M3) at both sides of the chassis
Operating Position
- Vertical: Usual operating position with the supplied feet (DisplayPort output facing up).
- VESA-mounted: The device can also be mounted behind an appropriate monitor using the supplied VESA mount kit.
*Note: From a thermal point of view horizontal operation is permitted. However, there are no rubber feet on the device. The maximum operating temperature is 35 °C then.
Operating System
- This barebone system comes without operating system.
- It is compatible with Windows 10 (64-bit) and Linux (64-bit).
Processor
- Model: Intel Core i3-8145U (ULV)
- System-on-a-chip architecture (SoC) with integrated memory and graphics controller: no chipset required
- FCBGA1528 package - directly soldered onto the mainboard
- Code name: Whiskey Lake U (8th Generation Intel Core)
- Cores / Threads: 2 / 4
- Clock rate: 1.8 GHz
- Max. Turbo Frequency: 3.9 GHz
- L1/L2/L3 Cache: 128 kB / 512 kB / 4 MB
- TDP wattage: 15 W maximum
- Manufacturing process: 3rd-generation enhanced 14nm++
- Maximum Tjunction Temperature: 100 °C
- Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
Integrated Graphics
- Intel UHD Graphics 620
- GPU clock frequency: 300~1000 MHz
- Execution Units (EUs): 24
- Supports DirectX 12
- Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
- Supports Quick Sync Video and Clear Video HD technology
- Supports up to three independent screens:
- DisplayPort 1.2 supports Ultra HD @ 60 Hz
- HDMI 2.0a supports Ultra HD @ 60 Hz
- D-Sub/VGA supports analog displays
Mainboard / BIOS
- Shuttle Mainboard FS10
- All capacitors are high quality solid capacitors
- Supports resume after power failure
- Supports Wake on LAN (WOL)
- Supports Power on by RTC Alarm
- Supports boot from M.2 SSD cards, USB devices and SD card reader
- AMI BIOS in 8 MByte EEPROM with SPI interface
- Supports hardware monitoring and Watchdog function
- Supports Unified Extensible Firmware Interface (UEFI)
- Supports Firmware-TPM (fTPM) Version 2.0
Power Adapter
- External 65 W power adapter (fanless)
- Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
- Output: 19 V DC, max. 3.42 A, max. 65 W
- DC cable length: ca. 170 cm
- AC cable length: ca. 170 cm (with 2-pin Europlug)
DC Input connector
- DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
- The DC-input of the computer supports an external
- power source with either 12V±5% or 19V±5%.
Memory support
- 2x SO-DIMM slot with 260 pins
- Supports DDR4-2400 (PC4-19200) SDRAM at 1.2 V
- Supports DDR4-2666 at 2400 MHz
- Supports Dual Channel mode
- Supports a maximum of 32 GB per DIMM,
- maximum total size: 64 GB
- Supports two unbuffered DIMM modules (no ECC or registered)
2.5" Drive Bay with SATA connector
- Supports one Serial ATA hard disk
- or one SATA SSD drive in 6.35 cm / 2.5" format
- Device height: max. 12.5 mm
- Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
- Supports Unified Extensible Firmware Interface (UEFI)
*Note: no Serial ATA cable is required. Please also refer to note
M.2 Slot for SSDs
- The M.2 2280 BM slot provides the following interfaces:
- PCI-Express Gen. 3.0 X4 with up to 4 GB/s
- SATA v3.0 (max. 6 Gbps)
- It supports M.2 cards with a width of 22 mm
- and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
- Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe NVMe SSDs (with M key)
Card Reader
- Integrated SD card reader
- Supports SD, SDHC and SDXC memory flash cards
- Supports booting from SD card
Audio
- Audio Realtek® ALC 662 High-Definition Audio
- Two analog audio connectors (3.5 mm) at the front panel:
- 2 channel line out (headphones)
- microphone input
- Digital multi-channel audio output: via HDMI and DisplayPort
Dual Gigabit LAN
- Dual network with two RJ45 ports
- Used network chips:
- Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
- Intel i219LM PHY connected to the MAC of the processor
- Supports 10 / 100 / 1.000 MBit/s operation
- Supports WAKE ON LAN (WOL)
- Supports network boot by Preboot eXecution Environment (PXE)
- Supports Teaming mode
Wireless Network (WLAN)
- Built-in M.2-2230-A/E WLAN card with two external antennas
- WLAN Controller Realtek RTL8821AE
- Supports WiFi IEEE 802.11b/g/n/ac in the 2.4 / 5 GHz band, 1T1R
- Supports 20 / 40 / 80 MHz channel bandwidth
- Security: supports WPA(-PSK), WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x, IEEE 802.11i
- Supports Bluetooth 4.0 in the 2.4 GHz band
Front Panel connectors/buttons
- 2x USB 3.2 Gen 2 (max. 10 Gbps)
- 4x USB 2.0
- Microphone input
- Audio Line-out (headphones)
- SD card reader (supports SD, SDHC, SDXC)
- Power button
- Power LED (blue)
- HDD LED (yellow)
Back Panel connectors
- DisplayPort 1.2
- HDMI 2.0a
- D-Sub/VGA
- 2x USB 3.2 Gen 2 (max. 10 Gbps)
- 2x Intel Gigabit LAN (RJ45)
- Serial COM port (5V / 12V, switchable to RS232 / RS422 / RS485)
- DC-input connector for external power adapter
- 4-pin connector (2.54 mm pitch) for power button, Clear CMOS and 5 V DC
Always-On Jumper
- By removing Jumper J9 (please refer to the quick user guide),
- the system will start unconditionally once power is applied.
Scope of Delivery
- Multi-language user guide
- Two metal feet with four screws M3 x 7 mm
- 2x external WLAN antenna
- VESA mount for 75/100mm standard (two metal brackets)
- Four screws M3 x 7 mm (screws together VESA mount and PC)
- Four screws M4 x 10 mm (to fix the VESA mount to the external surface)
- Two screws M3 x 5 mm to mount a 2.5" storage in the bay
- Two screws M3 x 5 mm to mount M.2 cards
- Driver DVD for Windows 10 (64-bit)
- External 65W power adapter with power cord (Europlug)
Optional Accessories
- - PCP11: adapter cable for the second COM port (replaces the VGA port)
- - CXP01: adapter cable for external power button
- - WWN03: LTE adapter kit for the 2.5" bay including two external LTE antennas
- - PRM01: 2U rack mount front plate for two Shuttle XPC slim
- - DIR01: mounting kit for 35 mm DIN-Rail
Environmental Specifications
- Operating temperature range: 0~40 °C
- Relative humidity, non-condensing: 10~90 %
Conformity & Certifications
- EMI: FCC, CE, BSMI, C-Tick
- Safety: ETL, CB, BSMI
- Other: RoHS, Energy Star, ErP
- This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
- (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
- (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
- (3) 2009/125/EC relating to eco design requirements for energy-related products (ErP),
- (4) 2014/53/EU Radio Equipment Directive (RED)
|