TM-360
60-Watt Compact Mixer /Amplifier
Features:
- One balanced mic/line input with phantom power, 2 balanced line level inputs with stereo RCA sum-to-mono inputs
- Mute priority of inputs
- Manual mute contact closure
- Mini-jack input on front panel overrides channel 2-input on back
- DIP switches for zone 2 assign vox trigger, mute priority, low-cut filter, phantom power
- 600 Ohm pre-out for external amplifier
- Zone 2-output, 1W / 8 Ohms, Balanced 600 Ohm
- Power saving standby mode: audio inactivity or contact closure
- Optional rack mount kit (model RMK-360)
- Safety/Compliance: cCSAus, CE FCC, RoHS
Specifications:
- Total Harmonic Distortion
- 60W (@ 1kHz) < 1%
- Frequency Response: 1W @ 1kHz
- Input 1, 2, 3 +1/-3dB, 80Hz–15kHz
- Tone Control
- Bass (100Hz) +10dB
- Treble (10kHz) +10dB
- Input Sensitivity
- Input 1 -10dBV to -50dBV
- Input 2, 3 0dBV to -20dBV
- Signal-to-Noise Ratio: 60W @ 1kHz, A-weighted
- Input 1, 2, 3 >80dB
- Residual Noise: Input 1-3 Volume Min, Tone Set @ Center
- Master Volume (Min) -72dB
- Master Volume (Max) -57dB
- Zone 2 Output
- Rated Power (8 Ohm) 1W (3% THD)
- Balanced (600 Ohm) 2.4V
- Mix Configuration Switches
- SW1 Zone 2 Assign Input 1
- SW2 Zone 2 Assign Input 2
- SW3 Zone 2 Assign Input 3
- SW4 VOX Trigger Input 1
- SW5 VOX Trigger Input 2
- SW6 Mute Link Input 2 & 3
- SW7 Low Cut, 400Hz 6dB/Oct.
- SW8 Ch1 Phantom Power, +18V
- Contact Closure
- Manual Mute Pins 1 & G = Input 1 Mute Trigger
- Master System Standby Pins G + 2 Power Standby
- Channels 3
- Signal-to-Noise (26dB Gain) 80dB
- Max Output Power: 1% THD
- 4 Ohms 60W
- 8 Ohms 30W
- Constant Voltage Power: 1% THD
- 25V 60W
- 70V 60W
- Line Current Draw: @ 120VAC 60Hz (Divide values by 2 for 230VAC)
- Standby Mode 0.15A
- Idle 0.24A
- Typical (1/8 power pink noise) 0.38A
- Max (1/3 power sine wave) 0.66A
- Thermal Dissipation: BTU/hr
- Standby Mode 26
- Idle 43
- Typical (1/8 power pink noise) 53
- Max (1/3 power sine wave) 75
- Operating Temp 40˚F~120˚F (4˚~49˚C), noncondensing
- Dimensions 11.8”W x 2”H x 9.02”D (300mm x 51mm x 230mm)
- Unit Weight 6.7lbs (3.04kg)
- Shipping Weight 9lbs (4kg)
- Power Requirements* 120VAC, 60Hz, 24W (USA & Canada) 230VAC, 50/60Hz, 24W (EC)
|